Customize your pot

Start from a plant, or from a size

Across the top120 mm How tall150 mm Wall thickness2.4 mm How much it narrows to the base3.0°

The outside is built in layers rather than picked from a list of pots. A body — its plan and its silhouette — carries a stack of surface treatments. The treatments stack, which is how the references are really built — bubbles over flutes, bands over a taper, a wave along a rib — so it is a list you add to rather than one choice off a menu.

The body — its plan

How many sides6

How much longer than it is wide1.0 : 1

The body — its silhouette

The surface — these stack

Hand-made irregularity

Every treatment above can be laid down perfectly even, or jogged about so the flutes are not quite the same width and not quite the same depth. The jogging is drawn from the seed, so the same seed is the same pot, every time it is opened and every time it is printed.

Seed

The outside

The rings — each one its own piece

A tray bottom you take off to tip the water out

How deep the tray22 mm How the tray holds on How much of a join, at the tray

How the rings hold together How much of a join, between rings

The base it sits on

How tall the base6 mm How far it steps in4 mm

How many pads6

Feet under the pot

How many4

How tall4 mm How wide each one12 mm How far out they reach80 %

Solid up to0 mm

Inside floor-to-wall corner

Adds material around the inside floor of the pot and liner, without changing the outside. A rounded corner is easier to clean; print settings still determine whether it holds water.

…

A liner inside it

Liner across the top70 mm

How far it stands off the floor30 mm

What it stands on

What the feet look like

How thick each foot9.0 mm

A mesh over the holes

How big each opening2.5 mm How deep it sits in1.0 mm

The holes in its bottom

How many holes4 How big each one drains7.0 mm The pipe wall that plugs in1.0 mm

Fit between liner and seat0.60 mm How thick the liner's rim2.0 mm How far the liner's rim oversails4.0 mm The seat ring Seat ring thickness3.0 mm How far it oversails the shell0.0 mm

How the water gets in How wide the opening22 mm

Your name needed Email or phone needed How many

Anything else

The request carries the design you see. We keep it under a short order code, then open Instagram so the conversation and the drawing stay tied together.

‹ Back to HardyStem